Catalogue
BED FOR IRRIGATION PUMP
Beds with bearing for suction tube ø 120 – ø 150 equipped with winch or reduction gear for lifting the the suction tube. They are heat painted or galvanised, with universal drilling suitable to any pump. Beds for pump with 4 feet and universal drilling. Model : BS4 cv. 10 – 25 BS5 cv. 25 […]
FORK FOR FIELDSTONES
Dimensions : Lenght 1.80 – 2.00 – 2.20 m Mod. 0/60 Steel tines, hydraulic dumper Mod. 00/60 Steel tines, mechanical dumper
FORAGE HANDLING AND MANURE FORK WITH GRAPPLE RETAINING MATERIAL
Upon request: Hitch for quick attach Mod. 58 Width 1,80 mt. Length tines 1,15 mt. Height and weight 1,00 mt. – 3,00 Kg. Mod. 59 Width 2,00 mt. Length tines 1,15 mt. Height and weight 1,00 mt. – 3,40 Kg.
LIFTER FOR GRAPE TRANSPORTATION
Mod. 990 Capacity 400 Kg. Dimensions 1.200 X h 2.700 Mod. 991 Capacity 600 Kg. Dimensions 1.450 X h 2.700 Mod. 992 Capacity 800 Kg. Dimensions 1.700 X h 2.700
WAGON LOAD WITH ONE TANK FOR GRAPE HARVEST
Dimensions Complete with lifting device, dumper and tank in inox steel or painted sheet plate. Tank Mt. 3,40 x 1,60 Lift Mt. 3,00 Capacity Ql. 15
CRANE
HYDRAULIC CRANE MOD. 60 Maximum Capacity: 1000 kg retract Maximum Capacity: 600 kg extended Extension: approximately 140 m. Hydraulic rams: 2 double-acting Weight: 240 Kg ROTATING CRANE ROTATING CRANE MOD. 622 Rotation 180° Maximum Capacity: Kg 1000 retract Maximum Capacity: Kg 600 extended 600 Extension : Approximately 1,40 m. m. Mounted with two quick […]
SEWAGE MIXER
The SARZOLA sewage mixer has been specifically designed for meeting industry requirements resulting from the need to ensure that sewage produced in stables and farms and found in collection tanks is as thin as possible. SARZOLA has therefore manufactured a high performance equipment to meet this need. The thinner sewage can then be drawn in […]
HYDRAULIC REAR LIFTER WITH 4 MECHANISMS
( Lifting – Traverse – Transportation – Box holding ) M 1.80 P10 Capacity 1.000 Kg Height 180 Cm Traverse 10° forward 15° backward Transportation 30 cm Activated by tractor hydraulic circuit UPON REQUEST: kit of pump, overgear and tank M 2.50 P13 Capacity 1.300 Kg Height 250 Cm Traverse 10° forward 15° […]
LIFTER FOR ROUND BALES AND BOXES
Rear lifter for round bales, boxes, pallets, etc. It is mounted on the tractor lifter with the third hydraulic point hitch. 3 models: 1) mounted with 4 quick attach hitches to the tractor. 2) equipped with gearcase and distributor with 2 levers . 3) equipped with gearcase and distributor with 3 levers for the transport […]
FORK FOR BALES
FORK FOR NORMAL AND WRAPPED ROUND BALES MOD. 44 To be applied to front loader of tractors with quick attach hitches. FORK FOR PRISMATIC BALES MOD. 455 Used for bales of different sizes. The device is attached to front loaders of tractors through a quick attach hitch.
ROUND BALER
T.R.T. 87 TRANSVERSE ROUND BALER TRANSVERSE ROUND BALER: T.R.T. 87 – MOD. 93 Transverse baler operating with cardan joints and quick-attach hitches. T.R.T. 87 SI – MOD.94 Semi-hydraulic transverse baler operating with cardan joints without quick-attach hitches. T.R.T. 87 I -MOD. 95 Hydraulic transverse baler.(System of two pumps, two distributors and one hydraulic engine for […]
WRAPPED BALE MOVER
MOD.43 WRAPPED BALE MOVER Engineered for handling and transport wrapped round of bales without puncturing the plastic. It is equipped with rotating and removable pipes. It can be mounted on the front-end-loader of the tractor.
REAR BALE LOADER MOD. 67
With stabilizer with 1 quick attach With stabilizer and hydraulic dump with three quick attach hitches Front loader application to tractor REAR LOADER WITH ONE MAST Loader with stabilizer and 2 quick attach hitches with block valve. Loader with stabilizer and hydraulic dump with 4 quick attach hitches and block valves. REAR LOADER […]